Users Guide

A dedicated hot spare is an unused backup disk that is assigned to a single virtual disk. When a physical disk in the virtual disk fails, the hot
spare is activated to replace the failed physical disk without interrupting the system or requiring your intervention.
For more information on hot spares including size requirements, see Protecting Your Virtual Disk With A Hot Spare. For considerations
regarding RAID 10 and RAID 50 virtual disks created using the controller BIOS, see Dedicated Hot Spare Considerations.
Related link
Dedicated Hot Spare Protection Policy
Dedicated Hot Spare Considerations
Assigning A Dedicated Hot Spare
Unassigning A Dedicated Hot Spare
Assigning A Dedicated Hot Spare
1 Select the disk in the Connector (channel or port) table that you want to use as the dedicated hot spare. On some controllers, more
than one disk can be selected. The disks you have selected as dedicated hot spares are displayed in the Disks currently congured as
dedicated hot spare table.
2 Click Apply Changes when ready.
NOTE: For PERC H310 Adapter, PERC H310 Mini Monolithic, PERC H310 Mini Blades, PERC H700, PERC H710
Adapter, PERC H710 Mini Blades, PERC H710 Mini Monolithic, PERC H710P Adapter, PERC H710P Mini Blades, PERC
H710P Mini Monolithic, PERC H800, and PERC H810 Adapter controllers, if any of the selected physical drives are in
the spun down state, a message appears indicating the IDs of the spun down state and the delay in executing tasks on
them.
Unassigning A Dedicated Hot Spare
1 Select the disk in the Disks currently congured as dedicated hot spare table to unassign it. On some controllers, more than one disk
can be selected. Clicking the disk removes the disk from the Disks currently congured as dedicated hot spare table and returns it to
the Connector (channel or port) table.
2 Click Apply Changes when ready.
To Locate Assign Or Unassign Dedicated Hot Spare In Storage
Management
1 Expand the Storage tree object to display the controller objects.
2 Expand a Controller object.
3 Select the Virtual Disks object.
4 Select Assign Dedicated Hot Spare or Unassign Dedicated Hot Spare from the Available Tasks drop-down menu.
5 Click Execute.
Virtual Disk Task - Replace Member Disk Step 1 of 2
NOTE
: This feature is supported only on SAS and SATA controllers with rmware versions 6.1 and
later.
Does my controller support this feature? See Supported Features.
Virtual Disks
159