Users Guide

Property Denition
reported by the omreport command. For information on Command Line
Interface, see the Server Administrator Command Line Interface User’s Guide.
Target ID Displays the SCSI ID of the backplane (internal to the server) or the enclosure
to which the controller connector is attached. The default value is six.
Conguration Displays the mode in which the enclosure is operating. Possible values are:
• Joined — Indicates that the enclosure is operating in the joined-bus mode.
• Split — Indicates that the enclosure is operating in the split-bus mode.
• Unied — Indicates that enclosure is operating in the unied mode.
• Clustered — Indicates that the enclosure is operating in cluster mode.
Clustered mode is only available on cluster-enabled RAID controllers. For
more information, see Background Initialization On PERC Controllers.
For more information on joined, split, and cluster modes, see the enclosure
hardware documentation. For information on how to cable the enclosure to
accommodate these dierent modes, see the enclosure hardware
documentation.
The bus conguration switch when toggled on a 220S or 221S enclosure, the
enclosure should be turned o. For more information, see Changing The Mode
On 220S And 221S Enclosures.
Older 200S enclosures with a version 1.8 kernel that only have one EMM may
display Split Bus mode and not Joined Bus mode. Joined Bus or Clustered
modes may display when applicable in these circumstances.
Firmware Version Displays the version of the enclosure rmware.
NOTE: For systems supporting multiple backplanes, the rmware
version appears as upstream and downstream versions.
Service Tag Displays the enclosure Service Tag. The enclosure is identied by a unique
Service Tag number. This information is used to route support calls to the
appropriate personnel.
Express Service Code The enclosure is identied by a unique Express Service Code number. This
information is used to route support calls to the appropriate personnel.
Asset Tag Displays the asset tag information for the enclosure. You can change this
property using the Setting Asset Data task.
Asset Name Displays the name assigned to the enclosure. You can change this property
using the Setting Asset Data task.
Backplane Part Number Displays the part number of the enclosure backplane.
SAS Address Displays the SAS address of the SAS backplane.
Split Bus Part Number Displays the part number of the enclosure split bus module. A split bus is
indicated by a single triangle symbol on the back of the enclosure.
Enclosure Part Number Displays the part number of the enclosure.
Enclosure Alarm Displays whether the alarm on the enclosure is enabled or disabled.
Enclosures And Backplanes 103