Users Guide

• Setting The Patrol Read Mode

• Starting And Stopping Patrol Read

• Managing The Preserved Cache

• Changing The Controller Properties

• Managing The Physical Disk Power

• Managing The Encryption Key

• Converting To RAID Capable Disks

• Converting To Non-RAID Disks

• Changing The Controller Mode

• Auto Congure RAID0 Operation

Creating A Virtual Disk

Does my controller support this feature? See Supported Features.

To launch the Create Virtual Disk Express Wizard, select the Create Virtual Disk task.

Enabling The Controller Alarm

Does my controller support this feature? See Supported Features.

To enable the alarm on the controller, select the Enable Alarm task. When enabled, the alarm sounds in the event of a device failure.

Disabling The Controller Alarm

Does my controller support this feature? Supported Features.

Select the Disable Alarm task to disable the alarm on the controller. When disabled, the alarm does not sound in the event of a device

failure.

Turning O The Controller Alarm

Does my controller support this feature? See Supported Features.

Select the Quiet Alarm task to turn o the controller alarm. However, the controller alarm remains enabled for future device failure.

Testing The Controller Alarm

Does my controller support this feature? See Supported Features.

Select the Test Alarm task to test whether the controller alarm is functional. The alarm sounds for about 2 seconds.

Setting The Rebuild Rate

Does my controller support this feature? See Supported Features.

The Set Rebuild Rate task allows you to change the rebuild rate for a controller.

Controllers