Users Guide

7 Click Execute.
After the task is completed, the Alert Log is populated.
Convert To RAID Capable Disk
This task enables a disk for all RAID operations.
NOTE: This task is not supported on PERC hardware controllers running in HBA mode.
NOTE: This task is not supported on PERC 10 controllers.
Convert To Non-RAID Disk
This task converts a disk to a Non-RAID disk. After converting a disk to non- RAID, the disk is exposed to the operating system unlike
uncongured good disks and it enables usage of disk in direct pass-through mode.
NOTE: This task is not supported on PERC hardware controllers running in HBA mode.
104 Physical Disks Or Physical Devices