Install Guide

Conguring The System To Send Traps To A Management
Station Using The vSphere CLI
Server Administrator generates SNMP traps in response to changes in the status of sensors and other monitored parameters. One or more
trap destinations must be congured on the system running Server Administrator to send SNMP traps to a management station.
Congure the ESXi system running Server Administrator to send traps to a management station:
1 Install the VMware vSphere CLI.
2 Open a command prompt on the system in which the vSphere CLI is installed.
3 Navigate to the directory in which the vSphere CLI is installed. The default location on Linux is /usr/bin and on Windows is C:\Program
Files\VMware\VMware vSphere CLI\bin.
4 Congure the SNMP setting using the command: vicfg-snmp.pl --server <server> --username <username> --
password <password> -c <community> -t <hostname>@162/<community>
where <server> is the hostname or IP address of the ESXi system, <username> is a user on the ESXi system, <password> is the
password of the ESXi user, <community> is the SNMP community name and <hostname> is the hostname or IP address of the
management station.
NOTE: If you do not specify a user name and password, you are prompted to specify the same.
5 Enable SNMP using the command: vicfg-snmp.pl --server <server> --username <username> --password
<password> -E
6 View the SNMP conguration using the command: vicfg-snmp.pl --server <server> --username <username> --
password <password> -s
7 Test the SNMP conguration using the command: vicfg-snmp.pl --server <server> --username <username> --
password <password> -T
NOTE
: The .pl extension is not required if you are using vSphere CLI on Linux or using vMA.
The SNMP trap conguration takes eect immediately without restarting any services.
Troubleshooting
When attempting to use the vihostupdate command, the following error may be displayed:
unpacking c:\OM-SrvAdmin-Dell-Web-<version>-<bldno>.VIB-ESX<version>i_<bld-revno>.zip
metadata.zip.sig does not exist
signature mismatch : metadata.zip
Unable to unpack update package.
This error is displayed if you are using an older version of the Remote CLI. To resolve this issue, download and install the latest vSphere
version of the CLI.
When attempting to use the vihostupdate command, the following error may be displayed:
Unable to create, write or read a file as expected.I/O Error (28) on file : [Errno 28] No
space left on device.
See the VMware KB article 1012640 at kb.vmware.com to x this error.
36
Installing Systems Management Software On VMware ESXi