Install Guide
The basic usage of the script is:
srvadmin-install.sh [OPTION]...
Server Administrator Custom Installation Utility
The Server Administrator utility runs in an interactive mode if you do not specify any options, and runs silently if you provide one or more
options.
The options are:
• [-c|--cimagent] — Installs Remote Enablement components.
• [-d|--dellagent] — Installs Server Instrumentation components. Including the granular components:
a Server Administrator CLI Interface
b Server Administrator SNMP Interface
c Server Administrator Operating System Log Interface
• [-g|--agent] — Installs the Server Instrumentation agent only.*
• [-h|--help] — Displays the help text.
• [-i|--cli] — Installs Server Administrator Command Line Interface.*
• [-l|--oslog] — Installs operating system logging component.*
• [-m|--snmp] — Installs Server Administrator SNMP component.*
• [-r|--rac] — Installs applicable RAC components and Server Instrumentation components.
• [-s|--storage] — Installs Storage Management, Server Instrumentation, and Default Management Interfaces'.
• [-t|--stragent] — Installs Server Instrumentation and Storage Management. This requires at least one management interface option in
combination.*
• [-u|--update] — Updates applicable Server Administrator components.
• [-w|--web] — Installs Server Administrator Web Server.
• [-x|--express] — Installs default components. Any other options passed will be ignored. The following components are installed::
a Server Instrumentation
b Storage Management
c RAC, if applicable
d Server Administrator Web Server
• [-z|--corecim] — Installs core CIM Interface.*
The following options can be used along with options stated above:
• [-a|--autostart] — Starts the installed services after components have been installed.
• [-p|--preserve] — Preserves the screen without clearing the installation information.
NOTE
: If you do not use the [-p | --preserve] option during the installation, the history information on the screen gets erased.
* — Options included for Linux granular installation.
Using The Shell Script To Perform The Installation In Interactive Mode
This installation procedure uses the srvadmin-install.sh to prompt you for the installation of specic components.
1 Log in as root to the system running the supported operating system where you want to install the managed system components.
2 Mount the Dell EMC OpenManage Systems Management Tools and Documentation software into the DVD drive.
3 Mount the DVD, if required.
4 Navigate to <OM DVD mount point>/SYSMGMT/srvadmin/linux/supportscripts.
28
Installing Managed System Software On Supported Linux And VMware ESXi