Install Guide

Prerequisite RPM Service Names Command Line Options
for srvadmin-install.sh
srvadmin-omilcore
srvadmin-deng
srvadmin-isvc
srvadmin-cm
srvadmin-rac-
components
Remote Enablement and
Server Instrumentation
PE Server, OS
srvadmin-xmlsup
srvadmin-hapi
srvadmin-omilcore
srvadmin-deng
srvadmin-isvc
srvadmin-cm
srvadmin-omacs
srvadmin-ominst
srvadmin-itunnelprovider
srvadmin-rac-
components
dsm_sa_datamgrd
dsm_sa_eventmgrd
dsm_sa_shrsvcd
-z or --corecim
NOTE: To manage the server, select either Server Administrator Web Server or one of the Management Interfaces – CLI, SNMP
or OS LOG along with Server Instrumentation (SI) or Server Administrator Storage Management Service (OMSS).
NOTE: Command-line options for [-t] and [-g] cannot be used without a management interface. These options must be
combined with management interface options such as [-w], [-i], [-z], [-l], or [-m]. For more information on custom installations,
see Server Administrator Custom Installation Utility.
OpenIPMI Device Driver
The Server Instrumentation feature of Server Administrator requires the OpenIPMI device driver that provides IPMI-based information and
functionality.
All supported Linux systems contain the required version of IPMI module in the default kernel itself. You do not have to install the IPMI
RPM. For more information on supported systems, see the Dell EMC OpenManage Systems Software Support Matrix.
Degradation Of Functionality When The Server Administrator
Instrumentation Service Is Started
After Server Administrator is installed, the Server Administrator Instrumentation Service performs a run‑time check of the OpenIPMI
device driver whenever it is started. The Server Administrator Instrumentation Service is started whenever you run either the srvadmin-
services.sh start or srvadmin‑services.sh restart commands, or when you restart the system (during which the Server Administrator
Instrumentation Service is started.)
Installing Managed System Software On Supported Linux And VMware ESXi
23