CLI Guide

name=value pair 1 cong= name=value pair 2 Description
NOTE: This option requires license to congure
primarynw as dedicated. If the appropriate license is
not installed or has expired, the system displays an
error message. For more information, see Dell License
Manager at dell.com/openmanagemanuals.
lom 1: Congures lom1 port as the primary network for remote
access.
lom 2: Congures lom2 port as the primary network for
remote access.
lom 3: Congures lom3 port as the primary network for
remote access.
lom 4: Congures lom4 port as the primary network for
remote access.
NOTE: The primarynw option is supported from
PowerEdge12G systems onward. If the primarynw is
set to dedicated, then set failovernw to none.
NOTE: If the primarynw is set to dedicated, then set
failovernw to none.
failovernw=none | lom1 | lom2 | lom3 | lom4
| all
none: Congures the failover network to none.
lom 1: Congures the failover network to lom 1.
lom 2: Congures the failover network to lom 2.
lom 3: Congures the failover network to lom 3.
lom 4: Congures the failover network to lom 4.
all: Congures the failover network to all loms.
NOTE: The failovernw option is supported on
PowerEdge12G systems onward. Congure both
primarynw and failovernw to set the nicselection. The
primarynw and failovernw options cannot have the
same value.
NOTE: Congure both primarynw and failovernw to
set the nicselection. The primarynw and failovernw
options cannot have the same value.
NOTE: Failovernw requires license to congure the
ports. If the appropriate license is not installed or has
expired, the system displays an error message. For
more information, see Dell License Manager at
dell.com/openmanagemanuals.
ipaddress=IP
Sets the IP address if you have selected static as the IP
address source for the BMC LAN interface.
subnet=Subnet Sets a subnet mask if you have selected static as the IP
address source for the BMC LAN interface.
Omcong Managing Components Using The Instrumentation Service 87