CLI Guide

name=value pair 1 name=value pair 2 Description
NOTE: These options are applicable
only when a custom prole is
selected.
memorypowermode=min | 800 | 1067 | 1333
| max
min: Sets the mode to minimum power
utilization.
800 | 1067 | 1333: Set the mode to 800,
1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
NOTE: These options are applicable
only when a custom prole is
selected.
fanmode=min | max
min: Sets the fanmode to minimum power
utilization.
max: Sets the fanmode to maximum power
utilization.
NOTE: These options are applicable
only when a custom prole is
selected.
NOTE: Reboot the system for the power proles setup options to take eect.
Omcong Chassis Pwrmonitoring Or Omcong Mainsystem
Pwrmonitoring
Use the omcong chassis pwrmonitoring or omcong mainsystem pwrmonitoring command to congure power consumption information.
The following table displays the valid parameters for the command:
Table 53. Valid Parameters Of
Omcong Chassis Pwrmonitoring Or Omcong Mainsystem Pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe index (must
specify).
cong=probe warnthresh=settodefault Sets the minimum and maximum warning
thresholds values to default.
warnthresh=<n > Sets a value for the warning threshold.
unit=watt | btuphr
watt: Displays the unit in Watts.
btuphr: Displays the unit in BTU/hr.
cong=resetreading type=energy | peakpower
energy: Resets the system energy reading.
peakpower: Resets the system peak power.
84 Omcong Managing Components Using The Instrumentation Service