CLI Guide

name=value pair 1 name=value pair 2 Description
remoteindication=true NA LCD ashes when the system detects an
active remote session.
NOTE: The options ipv4idrac, ipv6idrac, and macidrac are deprecated.
Omcong Chassis Info Or Omcong Mainsystem Info
Use the omcong chassis info or omcong mainsystem info command to enter an asset tag name and a chassis name for the system. For a
blade systems, enter asset tag names for modular components as well. The following table displays the valid parameters for the command:
Table 49. Valid Parameters Of Omcong Chassis Info Or Omcong Mainsystem Info
name=value pair Description
index=<n> Number of the chassis whose asset tag or name you are setting.
tag=<text>
Asset tag in the form of alphanumeric text. Letters or numbers
should not exceed 10 characters.
NOTE: The parameter is not supported on 13G and later
systems. For setting the asset tag, use omcong chassis
biossetup attribute=assetag seting=<value>.
name=<text> Name of the chassis.
In the following example, the asset tag for the main system chassis is being set to buildsys:
omconfig chassis info index=0 tag=buildsys
or
omconfig mainsystem info index=0 tag=buildsys
Index 0 always defaults to the main system chassis. The following command omits index=n, but accomplishes the same:
omconfig chassis info tag=buildsys
or
omconfig mainsystem info tag=buildsys
An acceptable command, when executed, results in the following message:
Chassis info set successfully.
For some chassis, you can assign a dierent name. You cannot rename the main system chassis. In the following example, the command
renames chassis 2 from storscsi1 to storscsia:
omconfig chassis info index=2 name=storscsia
or
omconfig mainsystem info index=2 name=storscsia
As with other commands, the CLI issues an error message if you do not have a chassis 2 (the main chassis=0). The CLI allows you to issue
commands only for the system conguration you have.
80
Omcong Managing Components Using The Instrumentation Service