CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
NOTE: The option is supported only
on 13G and later systems.
attribute=ProcNTurboCoreNum (N= 0-3) ,
where the value of N is 0–3.
NOTE: The option is supported only
on 13G and later systems.
setting=All | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 |
18
attribute=MonitorMwait setting=Enabled | Disabled
attribute=CollaborativeCpuPerfCtrl setting=Enabled | Disabled
System Security attribute=AcPwrRcvry setting=On | O | Last
attribute=AcPwrRcvryDelay setting=Immediate | User | Random
attribute=AcPwrRcvryUserDelay setting=<integer>
attribute=AesNi setting=Enabled | Disabled
attribute=IntelTxt setting=On | O
attribute=NmiButton setting=Enabled | Disabled
attribute=PasswordStatus setting=Locked | Unlocked
attribute=PwrButton setting=Enabled | Disabled
attribute=SetupPassword setting=<string>
attribute=SysPassword setting=<string>
attribute=TpmActivation
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
setting=NoChange | Activate | Deactivate
attribute=TpmClear
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
CAUTION: Clearing the TPM will
cause loss of all keys in the TPM.
This could aect booting of the
operating system.
setting=Yes | No
attribute=TpmSecurity setting=O | OnPbm | OnNoPbm
attribute=TpmInfo
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=TpmCommand
NOTE: The option is supported only
on 13G and later systems.
setting=None | Activate | Deactivate | Clear
attribute=TpmStatus setting=<string>
attribute=TcmActivation setting=NoChange | Activate | Deactivate
76 Omcong Managing Components Using The Instrumentation Service