CLI Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 9.1.2

name=value pair 1 attribute= name=value pair 2 setting= Description

• enabledwithpxe: Enables the third NIC

during system boot (with PXE on if the

system has PXE).

• disabled: Disables the third NIC during

system boot.

• enabledonly: Enables the third NIC

during system boot (with PXE o if the

system has PXE).

• enablednonepxe: Enables the third NIC

during system boot (with PXE o if the

system has PXE).

• enabledwithiscsi: Enables the third NIC

during system boot (with iSCSI on if the

system has iSCSI).

attribute=nic4 setting=enabled | enabledwithpxe | disabled

| enabledonly | enablednonepxe |

enabledwithiscsi

• enabled: Enables the fourth NIC during

system boot.

• enabledwithpxe: Enables the fourth NIC

during system boot (with PXE on if the

system has PXE).

• disabled: Disables the fourth NIC during

system boot.

• enabledonly: Enables the fourth NIC

during system boot (with PXE o if the

system has PXE).

• enablednonepxe: Enables the fourth NIC

during system boot (with PXE o if the

system has PXE).

• enabledwithiscsi: Enables the fourth

NIC during system boot (with iSCSI on if

the system has iSCSI).

attribute=numlock setting=on | o

• on: Uses the keypad as number keys.

• o: Uses the keypad as arrow keys.

attribute=NodeInterleave

NOTE: Use NodeInterleave

instead of numa as numa will be

deprecated in future releases.

setting=enabled | disabled

• enabled: Enables Node Interleaving and

disables Non-Uniform Memory Access.

• disabled: Disables Node Interleaving and

enables Non-Uniform Memory Access.

attribute=ppaddress setting=o | lpt1 | lpt2 | lpt3

• o: Disables the parallel port address.

• lpt1: Locates the device on LPT1.

• lpt2: Locates the device on LPT2.

• lpt3: Locates the device on LPT3.

attribute=ppmode setting=at | ps2 | ecp | epp

• at: Sets the parallel port mode to AT.

• ps2: Sets the parallel port mode to PS/2.

• ecp: Sets the parallel port mode to ECP

(extended capabilities port).

• epp: Sets the parallel port mode to EPP

(enhanced parallel port).

Omcong Managing Components Using The Instrumentation Service 67