CLI Guide

Type:
omreport preferences messages attribute=format
The output that is displayed is as follows:
Event Message Format : enhanced
Omreport preferences logging
Use the omreport preferences logging command to view the log details.
The following table lists the available attributes of omreport preferences logging.
Table 38. Valid Parameters Of Omreport Preferences Logging
name=value pair Description
attribute=osloglter Displays the settings congured for OS logging lter.
attribute=archiveesmlog Displays the settings for Auto Archive ESM Log preference.
attribute=logallsensors Displays the settings congured for Log All ESM Sensor events preference.
Type:
omreport preferences logging attribute=oslogfilter
The output that is displayed is as follows:
Log Critical : false
Log Warning : true
Log Informational : true
Omreport preferences webserver
Use the omreport preferences webserver command to view the URL details, current key-sign algorithm, and the JRE details.
The following table lists the available attributes of omreport preferences webserver.
Table 39. Valid Parameters Of Omreport Preferences Webserver
name=value pair Description
attribute=geturl Reports the URL information of the web server. This command helps to access the
Server Administrator GUI using a remote web server (management system).
attribute=getsignalgorithm Reports the current key-sign algorithm.
attribute=getjre Displays the version of the currently used JRE.
attribute=getjrelist Displays the supported JRE versions installed in the system.
attribute=getciphers Displays the current cipher values congured.
attribute=getsslprotocol Displays the current SSL Protocol values set.
attribute=getport Displays the information of the congured port value.
attribute=getipaddress Reports the congured IP Address value.
attribute=getsessiontimeout Displays the congured session time-out value.
omreport Viewing System Status Using The Instrumentation Service 55