CLI Guide

Omreport System Version Or Omreport Servermodule Version
Use the omreport system version or omreport servermodule version command to list the version numbers of the BIOS, rmware, systems
management software, and operating system installed on the system. Type:
omreport system version
or
omreport servermodule version
NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed, Server
Administrator displays the USC version.
The output that is displayed in the CLI window depends on the version of the BIOS, RAID controllers, and rmware installed on the system.
The following partial command results are unique and may not resemble the results for the conguration of the system:
Version Report
---------------------
Main System Chassis
---------------------
Name : BIOS
Version : 0.3.5
Name : iDRAC7
Version : 1.00
---------------------
Software
---------------------
Name : Microsoft Windows Server 2008 R2, Enterprise x64 edition
Version : Version 6.1 (Build 7600) (x64) Server Full Installation
Name : Dell Server Administrator
Version : 7.x.x
------------------------------------
Storage Controller Firmware
------------------------------------
Name : PERC H310 Mini
Version : 20.10.1-0025
Omreport Preferences Commands
Use the omreport preferences command to view the URL details of the Server Administrator Web server, key sign algorithm, JRE, and
message format.
Omreport Preferences Messages
Use the omreport preferences messages to view the congured alert message format.
The following table lists the available attributes of omreport preferences messages.
Table 37. Valid Parameters Of Omreport Preferences Messages
name=value pair Description
attribute=format Reports the currently congured alert message format.
54 omreport Viewing System Status Using The Instrumentation Service