CLI Guide
Memory Array
The following details are listed for each memory board or module in the system (for example, the system board or
the memory module in a given slot number):
• Location
• Use
• Installed Capacity
• Maximum Capacity
• Slots Available
• Slots Used
• ECC Type
BIOS
• Manufacturer
• BIOS Version
• Release Date
Firmware
• Name
• Version
Network Data
The following details are listed for each NIC and Team interface, if Team interface is congured in the system:
• IP Address
• Subnet Mask
• Default Gateway
• MAC Address
Storage Enclosures
The following details are listed for each storage enclosure attached to the system:
• Name
• Service Tag
Omreport System Thrmshutdown Or Omreport Servermodule
Thrmshutdown
Use the omreport system thrmshutdown or omreport servermodule thrmshutdown command to view the properties congured for a
thermal shutdown action.
The three properties that display for thermal shutdown are disabled, warning, or failure. If the CLI displays the following message, the
thermal shutdown feature has been disabled:
Thermal protect shutdown severity: disabled
If the system is congured to shutdown when a temperature probe detects a warning or failure event, one of the following messages is
displayed:
Thermal protect shutdown severity: warning
Thermal protect shutdown severity: failure
omreport Viewing System Status Using The Instrumentation Service
53