CLI Guide

or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command lists each of the valid parameters.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user scripts
as applicable.
Destination conguration settings for the Omreport system pedestinations
or Omreport servermodule pedestinations
The actual number of destinations that you can congure on a system using omreport system pedestinations or omreport servermodule
pedestinations may dier.
The following table displays the available settings.
Table 35. Settings For The Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the rst destination.
Example:
101.102.103.104: IPv4 address of the rst destination.
Destination Number:
Destination 2
destination 2: Displays the second destination.
Example:
110.120.130.140: IPv4 address of the second destination.
Destination Number:
Destination 3
destination 3: Displays the third destination.
Example:
201:202:203:204: IPv4 address of the third destination.
Destination Number:
Destination 4
destination 4: Displays the fourth destination.
Example:
210.211.212.213: IPv4 address of the fourth destination.
Destination Number:
Destination 5
destination 5: Displays the fth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
fth destination.
Destination Number:
Destination 6
destination 6: Displays the sixth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
sixth destination.
Destination Number:
Destination 7
destination 7: Displays the seventh destination.
omreport Viewing System Status Using The Instrumentation Service 47