CLI Guide

Omreport System Or Omreport Servermodule

Use the omreport system or omreport servermodule command to see a general status of the components of the system. When you specify

a level 3 command, such as omreport system shutdown or omreport servermodule shutdown, you get detailed information for one system

component rather than the high-level status obtained with omreport system or omreport servermodule. Type:

omreport system

omreport servermodule

If the system has both a main system chassis or main system and at least one direct attached storage device, Server Administrator may

display a summary that resembles the following example:

Table 33. System and attached storage

SEVERITY : COMPONENT

Ok : Main System Chassis

Critical : Storage

Commands for viewing logs

Use the omreport system or omreport servermodule command to view the following logs: the alert log, the command log, and the

hardware or ESM log.

NOTE

: If the Alert log or Command log displays invalid XML data (such as when XML data generated for the selection is not

well-formed), you must clear the log and resolve the issue. To clear the log, type: omconfig system alertlog

action=clear or omconfig system cmdlog action=clear. If you need to retain the log information for future

reference, save a copy of the log before clearing. For more information about clearing logs, see Commands For Clearing Logs.

To view the contents of the alert log, type:

omreport system alertlog

omreport servermodule alertlog

To view the contents of the command log, type:

omreport system cmdlog

omreport servermodule cmdlog

To view the contents of the ESM log, type:

omreport system esmlog

omreport servermodule esmlog

omreport Viewing System Status Using The Instrumentation Service