CLI Guide

Example to Specify the asset tag to encl20 on the enclosure attached to connector 2 on controller.
Example for SCSI, SATA,
and ATA controllers
omconfig storage enclosure action=setassettag controller=1 enclosure=2
assettag=encl20
Example for SAS controllers
omconfig storage enclosure action=setassettag controller=1 enclosure=1:2
assettag=encl20
Omcong Set Enclosure Asset Name
Table 200. Omcong Set Enclosure Asset Name
Description Species the asset name for an enclosure.
Syntax
omconfig storage enclosure action=setassetname controller=id
enclosure=<ENCLOSUREID> assetname=<string>, where id is the controller ID. The
<ENCLOSUREID> variable species the enclosure.
In this syntax, <string> is a user-specied alphanumeric string.
Example to Specify the asset name to encl43 for the enclosure attached to connector 2 on controller 1.
Example for SCSI, SATA,
and ATA controllers
omconfig storage enclosure action=setassetname controller=1 enclosure=2
assetname=encl43
Example for SAS controllers
omconfig storage enclosure action=setassetname controller=1 enclosure=1:2
assetname=encl43
Omcong Set Temperature Probe Thresholds
Table 201.
Omcong Set Temperature Probe Thresholds
Description Sets the minimum and maximum warning temperature thresholds for a specied temperature probe.
NOTE: This command is not supported on SAS controllers.
Syntax
omconfig storage enclosure action=settempprobes controller=id
enclosure=<ENCLOSUREID> index=id minwarn=n maxwarn=n, where id is the controller ID
and the temperature probe ID. The <ENCLOSUREID> variable species the enclosure.
In this syntax, n is a user-specied alphanumeric string.
Example to Set the temperature probe thresholds to 10 and 40 degree Celsius.
Example for SCSI, SATA,
and ATA controllers
omconfig storage enclosure action=settempprobes controller=1 enclosure=2
index=3 minwarn=10 maxwarn=40
NOTE: Here, temperature probe 3 resides in the enclosure attached to connector 2 on
controller 1.
Omcong storage commands 187