CLI Guide

Omcong Create Cachecade
Table 191. Omcong Create Cachecade
Description Creates a cachecade on the given controller.
Syntax
omconfig storage controller action=createcachecade controller=id pdisk=<PDISKID>
[name=<string>] where id is the controller ID as reported by the omreport storage controller command and
PDISKID is specied as:
pdisk=connector:enclosureID:targetID | connector:targetID
Example to Create a cachecade on controller 0.
Example
omconfig storage controller action=createcachecade controller=0 pdisk=0:2:3
name=Cachecade1
Omcong Enable LKM Controller
Table 192. Omcong Enable LKM Controller
Description Enables the LKM mode and creates the encryption key for the controller.
Syntax
omconfig storage controller action=enablelkm controller=id keyid=<keyid string>
passphrase= <passphrase string> [escrow=yes] [filepath= <Absolute path to the escrow
file>, where id is the controller ID as reported by the omreport storage controller command.
Example to Create the encryption key for the controller.
Example
omconfig storage controller action=enablelkm controller=1 keyid=Dell_123
passphrase=Dell_123 escrow= yes filepath=C:/escrow.xml
NOTE: If you set escrow=yes, specify the escrow le
path.
Omcong Rekey LKM Controller
Table 193.
Omcong Rekey LKM Controller
Description Re-keys the encryption key in LKM mode for the controller.
Syntax
omconfig storage controller action=rekeylkm controller=id keyid=<keyid>
passphrase=<passphrase string> escrow=yes filepath=<Absolute path to the escrow
file>, where id is the controller ID as reported by the omreport storage controller command.
Example to Re-key the encryption key for the controller.
Example
omconfig storage controller action=rekeylkm controller=1
184 Omcong storage commands