CLI Guide

Omcong Set Patrol Read Mode
Table 188. Omcong Set Patrol Read Mode
Description Sets the patrol read mode for the controller.
Syntax
omconfig storage controller action= setpatrolreadmode controller=id mode= manual|
auto|disable, where id is the controller ID as reported by the omreport storage controller command.
Example to Sets the patrol read on controller 1 to manual mode
Example
omconfig storage controller action= setpatrolreadmode controller=1 mode=manual
Omcong Start Patrol Read
Table 189. Omcong Start Patrol Read
Description Starts the patrol read task on the controller.
Syntax omconfig storage controller action=startpatrolread controller=id, where id is the controller
ID as reported by the omreport storage controller command.
Example to Start the patrol read task on controller 1.
Example
omconfig storage controller action=startpatrolread controller=1
NOTE: To start patrol read, the current patrol read mode is set to Manual.
Omcong Stop Patrol Read
Table 190.
Omcong Stop Patrol Read
Description Stops the patrol read task on the controller.
Syntax omconfig storage controller action=stoppatrolread controller=id, where id is the controller ID
as reported by the omreport storage controller command.
Example to Stop the patrol read task on controller 1.
Example
omconfig storage controller action=stoppatrolread controller=1
NOTE: To stop patrol read, the current patrol read mode is set to Manual.
Omcong storage commands 183