CLI Guide

Example to Import foreign congurations on controller 1.
Example
omconfig storage controller action= importforeignconfig controller=1
Omcong Import Or Recover Foreign Conguration
Table 183. Omcong Import Or Recover Foreign Conguration
Description Imports and recovers all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= importrecoverforeignconfig controller=id, where id
is the controller ID as reported by the omreport storage controller command.
NOTE: This command is supported on rmware version 5.1.1 and later.
Example to Import foreign congurations on controller 1.
Example
omconfig storage controller action= importrecoverforeignconfig controller=1
Omcong Clear Foreign Conguration
Table 184.
Omcong Clear Foreign Conguration
Description Clears or deletes all virtual disks that reside on physical disks newly attached to the controller.
Syntax omconfig storage controller action= clearforeignconfig controller=id, where id is the
controller ID as reported by the omreport storage controller command.
NOTE: This command is supported only in rmware version 5.0.x.
Example to Clear foreign congurations on controller 1.
Example
omconfig storage controller action= clearforeignconfig controller=1
Omcong physical disk power management
Table 185.
Omcong physical disk power management
Description Manages the power of physical disks in a controller by spinning down hot spares, congured drives, and uncongured
drives.
Syntax
omconfig storage controller action= setpdiskpwrmanagement
spindownunconfigureddrives= <enabled | disabled> spindownhotspares=<enabled |
disabled> spindownconfigureddrives=<enabled | disabled> idlec=<enabled | disabled>
spindowntimeinterval=<30 to 1440>(minutes) spinupstarttime=<HH:MM:AM/PM>
spinuptimeinterval= <1 to 24>(hours), where id is the controller ID as reported by the omreport storage
controller command.
Omcong storage commands 181