CLI Guide

Omcong Set Background Initialization Rate
Table 177. Omcong Set Background Initialization Rate
Description Sets the background initialization rate.
Syntax omconfig storage controller action=setbgirate controller=id rate=<0 to 100>, where id is
the controller ID as reported by the omreport storage controller command.
Example to Sets the background initialization rate to 50 on controller 1.
Example
omconfig storage controller action=setbgirate controller=1 rate=50
Omcong Set Reconstruct Rate
Table 178. Omcong Set Reconstruct Rate
Description Sets the reconstruct rate.
Syntax
omconfig storage controller action= setreconstructrate controller=id rate=<0 to
100>, where id is the controller ID as reported by the omreport storage controller command.
Example to Set the reconstruct rate to 50 on controller 1.
Example
omconfig storage controller action= setreconstructrate controller=1 rate=50
Omcong Set Check Consistency Rate
Table 179.
Omcong Set Check Consistency Rate
Description Sets the check consistency rate.
Syntax
omconfig storage controller action= setcheckconsistencyrate controller=id rate=<0 to
100>, where id is the controller ID as reported by the omreport storage controller command.
Example to Sets the check consistency rate to 50 on controller 1.
Example
omconfig storage controller action= setcheckconsistencyrate controller=1 rate=50
Omcong storage commands 179