CLI Guide
Conventions for parameter tables
When listing the parameters that a command can take, the parameters are listed in alphabetical order instead of the order in which they
appear in the command line interface.
The symbol |, often called pipe, is the logical exclusive or operator. For example, enable | disable means you can enable or disable the
component or feature, but you cannot simultaneously enable and disable the component or feature.
Command summary of the omreport command
Depending on the system conguration, the results of the omreport command vary from one system to another. Data displays for installed
components only.
NOTE: When a system includes an external chassis, the displayed results vary by operating system. On SUSE Linux Enterprise
Server and Red Hat Enterprise Linux systems, the omreport commands display external chassis information in a separate section
after the main chassis information. On Microsoft Windows systems, data about the external chassis does not appear in the
omreport output.
The following table provides a high-level summary of the omreport command. The column titled Command level 1 displays the omreport
command at its most general use. Command level 2 shows the major objects or components that you can view using omreport (about,
chassis, storage, and system).
Command level 3 lists the specic objects and components to view reports. User privilege required refers to
the type of privilege you need to run the command, where U = User, P = Power User, and A = Administrator. Use is a very general
statement about the actions performed using omreport.
The following table lists the omreport commands available for about, system, and main system chassis.
Table 7. Command Level 1, Level 2, And Level 3 For omreport
Command Level 1 CommandLevel 2 Command Level 3 User Privilege Required Use
omreport modularenclosure U, P, A Displays the information
for all the modular
chassis.
about U, P, A Displays the version
number and properties for
Server Administrator.
details=true U, P, A Displays the information
for all the Server
Administrator programs
installed.
chassis or mainsystem U, P, A Displays the general
status of all the main
components.
acswitch U, P, A Displays the failover
settings where redundant
AC power lines are
supported in a system.
batteries U, P, A Displays the properties
set for batteries.
bios U, P, A Displays the BIOS
information such as
omreport Viewing System Status Using The Instrumentation Service 17