CLI Guide
omreport Viewing System Status Using The
Instrumentation Service
The omreport command allows you to see detailed information about the system components. You can also retrieve summaries for many
system components at one time, or get details about a specic component. This chapter shows you how to get reports with the level of
detail that you want.
Commands documented in this chapter vary in whether they dene the elds that appear in the results of a particular omreport command.
The elds are dened only if they have a special or less familiar use.
As with all other components, use omreport to view component status, and omcong to manage a component. For information on
conguring components for management, see omcong: Managing Components Using The Instrumentation Service.
Use the omreport commands to get information you need to execute an omcong command. For example, to edit the minimum
temperature for a warning event on a temperature probe, you must know the index of the probe you want to congure. Use
omreport
chassis temps to display a list of probes and their indexes.
The omreport commands available on the system depend on the system conguration. The following table lists the systems on which the
omreport commands are applicable:
Table 6. System Availability For The omreport Command
Command Level 1 Command Level 2 Applicable To
omreport modularenclosure Blade systems
servermodule Blade systems
mainsystem Blade systems
system Rack and Tower systems
chassis Rack and Tower systems
preferences Blade or Rack, and Tower systems
Topics:
• Conventions for parameter tables
• Command summary of the omreport command
• Help With The omreport Command
• omreport modularenclosure
• omreport about
• Omreport Chassis Or Omreport Mainsystem Commands
• Omreport Licenses
• Omreport System Commands Or Omreport Servermodule Commands
• Omreport Preferences Commands
3
16 omreport Viewing System Status Using The Instrumentation Service