CLI Guide

Example to Export log on physical disk 3 on connector 0 of controller 1. On a
SAS controller, the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk action=exportlog
controller=1 pdisk=0:2:3
Omcong Convert RAID To Non-RAID
Table 128. Omcong Convert RAID To Non-RAID
Description
Converts RAID to non-RAID on a physical disk.
Syntax
omconfig storage pdisk
action=convertraidtononraid controller=id
pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
NOTE: To convert multiple RAID to non-RAID on a given
controller, use omcong storage controller
action=convertraidtononraid command. For more
information, see omcong Convert Multiple RAID To Non-
RAID.
Example to Convert RAID to non-RAID on physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SAS controllers
omconfig storage pdisk action=raidtononraid
controller=1 pdisk=0:2:3
Omcong Convert Non-RAID To RAID
Table 129.
omcong Convert Non-RAID To RAID
Description
Converts non-RAID to RAID on a physical disk.
Syntax
omconfig storage pdisk
action=convertnonraidtoraid controller=id
pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Omcong storage commands 155