CLI Guide

Omcong Oine Physical Disk
Table 116. omcong Oine Physical Disk
Description
Makes a physical disk oine.
Syntax
omconfig storage pdisk action=offline
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Oine physical disk 3 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:2:3
Omcong Online Physical Disk
Table 117.
omcong Online Physical Disk
Description
Brings an oine physical disk back online.
Syntax
omconfig storage pdisk action=online
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Bring physical disk 3 on connector 0 of controller 1 back online. On a
SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:2:30
Omcong storage commands 149