CLI Guide

Omcong Blink Physical Disk
Table 110. omcong Blink Physical Disk
Description
Blinks the light (light emitting diode or LED display) on one or more
physical disks attached to a controller.
Syntax
omconfig storage pdisk action=blink
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Blink physical disk 0 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=blink
controller=1 pdisk=0:0
Example for SAS controllers
omconfig storage pdisk action=blink
controller=1 pdisk=0:2:0
Omcong Unblink Physical Disk
Table 111.
omcong Unblink Physical Disk
Description
Unblinks the light (light emitting diode or LED display) on one or
more physical disks attached to a controller.
Syntax
omconfig storage pdisk action=unblink
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Unblink physical disk 0 on connector 0 of controller 1. On a SAS
controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=unblink
controller=1 pdisk=0:0
Example for SAS controllers
omconfig storage pdisk action=unblink
controller=1 pdisk=0:2:0
146 Omcong storage commands