CLI Guide
Omreport storage commands
The omreport command allows you to view storage component information for disks, controllers, enclosures, batteries, global storage
properties, connectors and cachecades that are part of the storage system. The omreport command helps to get reports with the level of
detail that you want.
The commands may vary in, whether they dene the elds that appear in the results of a particular omreport command. Fields are dened
only if they have a special or less familiar use.
The following sections provide the omreport command syntax required to display the information of various storage components.
To see a list of valid commands for omreport storage, type:
omreport storage -?
The following table provides the omreport storage command syntax.
Table 91. omreport Storage Help
Command Level 1 Command Level 2 Command Level 3 Use
omreport storage Displays a list of storage components for which omreport commands are
available.
pdisk Displays a list of the omreport storage pdisk parameters for displaying
physical disk information.
vdisk Displays a list of omreport storage vdisk parameters for displaying virtual
disk information.
controller Displays a list of the omreport storage controller parameters for
displaying controller information.
enclosure Displays a list of the omreport storage enclosure parameters for
displaying enclosure information.
battery Displays a list of the omreport storage battery parameters for displaying
battery information.
globalinfo Displays a list of the omreport storage globalinfo parameters for
displaying global storage property information.
connector Displays a list of the omreport storage connector parameters for
displaying connector information.
cachecade Displays a list of the omreport storage cachecade parameters for
displaying cachecade properties.
pciessed Displays the properties of the PCIe SSD subsystem.
nvmeadapter Displays the list of NVMe adapters.
Topics:
• Omreport Physical Disk Status
• omreport Virtual Disk Status
• Omreport controller status
7
136 Omreport storage commands