CLI Guide

In this example, command level 1 is omreport, command level 2 is about, and the name= value pair is details=true.
Many commands use command level 1, command level 2, and command level 3, but do not require any parameters (name=value pairs).
Most omreport commands are of this type. For example, the following command displays a list of alert actions that are congured for
components on a system.
omreport system alertaction
The most complex commands have all three command levels and can have multiple name=value pairs. The following is an example of two
name=value pairs:
omconfig system assetinfo info=depreciation duration=3
The following is an example of nine name=value pairs:
omconfig system assetinfo info=acquisition purchasecost=<n> waybill=<n> installdate=<mmddyy>
purchasedate=<mmddyy> ponum=<n> signauth=<text> expensed=<yes>|no> costcenter=<text>
In each chapter of this document, command syntax and other information about the commands are formatted using any of the following
elds as appropriate:
Table 4. Command syntax
command level 1 command level 2 command level 3 name=value pair 1 name=value pair 2
Introduction 13