CLI Guide
Table 81. Valid Parameters Of omcong system assetinfo info=lease Or omcong servermodule assetinfo info=lease
Command Level
1
Command Level 2 Command Level
3
Name=
Value Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=lease buyout=<amount> Amount of money paid to
purchase a system from a
lessor.
lessor=<lessor> Business entity that is leasing
the system out.
multischedule=true | false Whether cost of leasing the
system is computed by more
than one rate schedule.
ratefactor=<factor> Factor used to calculate the
lease payment.
value=<residual> Fair market value of the
system at the end of the lease
period.
Example command for adding lease information
To provide a value for a lease parameter, type a command of the form: omcong system assetinfo info=lease <name=value pair 2> or
omcong servermodule assetinfo info=lease <name=value pair 2>. For example, type:
omconfig system assetinfo info=lease value=4500
or
omconfig servermodule assetinfo info=lease value=4500
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfocommand at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding maintenance information
Maintenance refers to activities required to keep the system in good working order. The following table displays the valid parameters for
adding maintenance information.
Table 82. Valid Parameters Of
omcong system assetinfo info=maintenance Or omcong servermodule assetinfo info=maintenance
Command Level
1
Command Level 2 Command Level
3
Name= Value Pair
1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=maintenance enddate=<enddate> Date the extended warranty
agreement ends.
provider=<provider> Business entity providing the
maintenance service.
126 Omcong System Or Servermodule Assetinfo Editing Cost Of Ownership Values