CLI Guide

Adding extended warranty information
Use the omcong system extwarranty or omcong servermodule extwarranty command to assign values for extended warranty
information. A warranty is a contract between the manufacturer or dealer and the purchaser of a system. The warranty identies the
components that are covered for repair or replacement for a specied length of time or usage. The extended warranty comes into force
after the original warranty expires. For details on how to edit warranty values, see Adding Warranty Information.
The following table displays the valid parameters for the command:
Table 80. Valid Parameters Of omcong system assetinfo info=extwarranty Or omcong servermodule assetinfo info=extwarranty
Command
Level 1
Command Level 2 Command
Level 3
Name= Value Pair 1 Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=extwarranty cost=<cost> Cost of the extended
warranty service.
enddate=<enddate> Date the extended
warranty agreement ends.
provider=<provider> Business entity that
provides the extended
warranty service.
startdate=<startdate> Date the extended
warranty service begins.
Example command for adding extended warranty information
To provide a value for an extended warranty parameter, type a command of the form: omcong system assetinfo info=extwarranty
<name=value pair 2> or omcong servermodule assetinfo info=extwarranty <name=value pair 2>. For example, type:
omconfig system assetinfo info=extwarranty enddate=012503
or
omconfig servermodule assetinfo info=extwarranty enddate=012503
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Command For Adding Acquisition
Information.
Adding lease information
A lease is an agreement to pay for the use of a system for a specied period of time. The lessor retains ownership of the system. The
following table displays the valid parameters for the command.
Omcong
System Or Servermodule Assetinfo Editing Cost Of Ownership Values 125