Users Guide
• View current SNMP trap alert thresholds and set the alert threshold levels for instrumented system components. The selected traps
are triggered if the system generates a corresponding event at the selected severity level.
– SNMP Test Trap sends the trap to the selected destination from the congured destinations list displayed. The Server
Administrator SNMP component should be installed for sending the test trap. The administrator should congure the IP addresses/
FQDN in the OS SNMP service or conguration le to get the list of trap destinations.
NOTE: This feature is not supported on VMware ESXi.
–
Enable SNMP Traps allows you to congure settings for a component using a check box and radio button. Selecting a radio button
makes the appropriate check-box state change, whereas deselecting the radio button also changes the appropriate check-box
state.
NOTE: Alert actions for all potential system component sensors are listed on the Alert Actions window, even if they are not
present on your system. Setting alert actions for system component sensors that are not present on your system has no
eect.
NOTE: On any Microsoft Windows operating system, the Advanced System Settings > Advanced Recovery option in the
operating system must be disabled to make sure that Server Administrator Automatic System Recovery alerts are generated.
Session management
Subtabs: Session
Under the Session Management tab, you can:
• View session information for current users that have logged in to Server Administrator.
• Terminate user sessions.
NOTE
: Only users with Administrator privileges can view the Session Management page and terminate sessions of logged-in
users.
Main System Chassis or Main System
Click the Main System Chassis or Main System object to manage your system's essential hardware and software components.
The available components are:
• Batteries
• BIOS
• Fans
• Firmware
• Hardware Performance
• Intrusion
• Memory
• Network
• Ports
• Power Management
• Power Supplies
• Processors
Server Administrator services
43