Connectivity Guide

Table 232. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
enabled(2)
The hard-drive fault LEDs’ state is disabled (oine, a
binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The hard-drive fault LEDs’ state is not ready.
reset(8)
The hard-drive fault LEDs have been reset.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
Table 233. Chassis Identication Control Capabilities
Variable Name : DellChassisIdentifyControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis identication
capabilities.
unknownCapabilitie
s(1)
The chassis identication control’s capabilities are
unknown.
enableCapable(2)
The chassis identication controls can be disabled
(oine, a binary 0 value) or enabled (online, a binary 1
value).
notReadyCapable(4)
The chassis identication control’s capabilities are not
ready.
identifyCapable(8)
The chassis identication control’s LEDs can be made to
identify the chassis.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
NOTE: Chassis identication capabilities allow system administrators to set front panel light-emitting diodes (LEDs) to
blink when the chassis has malfunctioning components. When enabled, the blinking lights help administrators locate the
problem chassis.
Table 234. Chassis
Identication Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The chassis identication control’s state is unknown..
enabled(2)
The chassis identication control’s state is disabled
(oine, a binary 0 value) or enabled (online, a binary 1
value).
notReady(4)
The chassis identication control’s state is not ready.
identifyChassis(8)
The chassis identication control’s LEDs may be returned
to (normal) 0, or (identify chassis) 1.
63