Connectivity Guide

NOTE: This global status should be used by applications other than HP OpenView.
HP OpenView should refer to the globalStatus in the root level object group.
Syntax DellStatus
Access Read-only
Table 1393. Agent Last Global System Status
Name
agentLastGlobalSystemStatus
Object ID 1.3.6.1.4.1.674.10893.1.20.110.14
Description The previous global status of the system managed by the Storage Management software.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax DellStatus
Access Read-only
Table 1394. Agent Smart Thermal Shutdown
Name
agentSmartThermalShutdown
Object ID 1.3.6.1.4.1.674.10893.1.20.110.15
Description Indicates the status of smart thermal shutdown for PowerVault 220S and PowerVault 221S
enclosures.
Possible values:
1: Enabled
2: Disabled
3: Not applicable
Syntax Integer
Access Read-only
Physical Devices Group
The Physical Devices MIB group provides information about the devices managed by the Storage Management software and their
relationships to each other. The following MIB tables dene objects and relationships (connections) among the objects.
• Controller Table — describes available properties for each controller on the managed system.
• Channel Table — describes available properties for each channel on the managed system.
• Enclosure Table — describes available properties for each enclosure on the managed system.
• Array Disk Table — describes available properties for each physical array disk on the managed system.
• Array Disk Enclosure Connection Table — describes the connections between Fibre Channel array disks, their enclosure, and
their associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate
MIB table for that object where all of the object properties can be found.
• Array Disk Channel Connection Table — describes the connections between SCSI array disks, their channel, and their
associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate MIB
table for that object where all of the object properties can be found.
• Fan Table — describes available properties for each fan on the managed system.
319