Connectivity Guide

Possible Data Values Meaning of Data Value
unknown(1)
Diskette control state is unknown.
disketteControlAutoConfigEnabled OrEnabled(2)
Diskette control is set as autocongurable or enabled.
Table 1148. Network Interface Control Capabilities
Variable Name: DellNetworkInterfaceControlCapabilitiesUnique
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
Unknown setup BIOS network interface capabilities.
enableCapable(2)
Setup BIOS is capable of enabling the network interface.
enableWithoutPXECapable(4)
Setup BIOS is capable of enabling the NIF without Pre-boot
eXecution Environment (PXE).
Table 1149. Network Interface Control Settings
Variable Name: DellNetworkInterfaceControlSettingsUnique
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
Network interface state is unknown.
enabled(2)
Network interface is enabled.
enabledWithoutPXE(4)
Network interface is enabled without PXE.
Table 1150. BIOS Setting Value Type
Variable Name: DellBIOSSettingValueType
Data Type: Integer
Possible Data Values Meaning of Data Value
integer(1)
Value type is integer.
string(2)
Value type is string.
enumeration(3)
Value type is enumeration.
orderedList(4)
Value type is ordered list.
Local Response Agent Group
The Local Response Agent Group provides information about various attributes of your system’s local response agent (LRA). The
LRA allows systems managers to predetermine how a system running the server administrator responds to a particular event type,
such as the loss of redundancy in a specic component or the elevation of temperature in a chassis. Systems managers can
congure the LRA to respond to an event type with a specic action. When the condition of the critical component worsens, the
systems manager can escalate the response to make it more obvious to the operator.
For example, when a voltage probe on a monitored machine reaches a warning condition, the systems manager may want to notify
the operator by causing the machine to beep. When the voltage probe reaches failure, the systems manager might want to have the
system that has a failing component send a broadcast message to the management system and power o the troubled system.
267