Connectivity Guide

Memory Group
The Memory Group provides information about the physical memory in your system. Variables in this group include error correction
type, location, and dierent types of memory use, such as cache, ash, system, video, and nonvolatile memory.
Physical Memory Tables
The following management information base (MIB) tables dene the objects in the Memory Group:
• Physical Memory Array Table
• Physical Memory Array Mapped Table
• Physical Memory Conguration Table
• Physical Memory Logging Table
• Redundant Memory Unit Table
• Physical Memory Card Table
Physical Memory Array Table
The physical memory array is the entire physical memory of a system. The example that follows shows variable values for a system
that has one 128-megabyte (MB) dual in-line memory module (DIMM):
• physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or 2 gigabytes (GB)
• physicalMemoryArrayTotalNumberSockets = 4 (the example system has four DIMM slots on the motherboard)
• physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM installed)
The Rank of the DIMM are :
• 0 — Unknown
• 1 — Single
• 2 — Dual
• 4 — Quad
• 8 — Octal
• 16 — Hexa
The following object sets up the Physical Memory Array Table:
Table 942. Physical Memory Array Table
Name
physicalMemoryArrayTable
Object ID 1.3.6.1.4.1.674.10892.1.1300.10
Description Denes the Physical Memory Array Table.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
Table 943. Physical Memory Array Table Entry
Name
physicalMemoryArrayTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1300.10.1
Description Denes the Physical Memory Array Table entry.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
224