CLI Guide

Data Engine 5.x.x

Hardware Application Programming Interface 5.x.x

Instrumentation Service 6.x.x

Instrumentation Service Integration Layer 1.x.x

Intel SNMP Agent 1.xx.x

OpenManage Inventory Collector 6.x.x

OpenManage Tools 6.x.x

Remote Access Controller 4 Data Populator 4.x.x

Remote Access Controller 4 Managed Node 4.6.3

Secure Port Server 1.x.x

Server Administrator Framework 6.x.x

Agent for Remote Access 1.x.x

Storage Management 3.x.x

Sun Java Runtime Environment 1.x.xx

Omcong Chassis Or Omcong Mainsystem

Use the omcong chassis or omcong mainsystem commands to:

• Set to default or assign specic values for fan, voltage, and temperature probes

• Congure BIOS behavior during system start up

• Clear memory error counts

• Enable or disable power button control features if the system conguration permits

Use the omcong chassis -? or omcong mainsystem -? command to view a list of all omcong chassis or omcong mainsystem

commands.

Omcong Chassis Biossetup Or Omcong Mainsystem Biossetup

Use the omcong chassis biossetup or omcong mainsystem biossetup command to congure system BIOS settings that are

normally available only in the BIOS setup boot time settings of the system.

CAUTION: Changing certain BIOS setup options may disable the system or require you to reinstall the operating system.

NOTE: Reboot the system for the BIOS setup options to take eect.

NOTE: Not all BIOS setup options are available on every system.

NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, you cannot congure the BIOS settings using

omcong command.

BIOS setup settings on systems prior to PowerEdge 12G systems

The following table displays the name=value pairs that you can use with omcong chassis biossetup or omcong mainsystem

biossetup command on systems prior to PowerEdge 12G systems.

Table 45. BIOS Setup Settings on systems prior to PowerEdge 12G systems

name=value pair 1 attribute= name=value pair 2 setting= Description

attribute=acpwrrecovery setting=o | last| on

• o: System is turned o.

• last: System returns to the previous

state.