CLI Guide

Command
Level 1
Command Level 2 Command Level 3 User
Privilege
Required
Use
webserver A Starts or stops the Web server.
chassis or
mainsystem
biossetup A Congures the behavior of specic system components
controlled by the BIOS.
fans P, A
Congures fan probe warning thresholds to the default or a
specic value.
NOTE: You cannot change threshold values on
embedded server management (ESM3) and Dell
PowerEdge x8xx systems.
frontpanel A Congures the Power button, Non-Masking Interrupt (NMI)
button, encryption access, and LCD display of the system.
info P, A Allows you to set an initial value, or to edit the value of the
asset tag or chassis name.
leds P, A Species when to ash a chassis fault LED or chassis
identication LED, and allows you to clear the LED for the
system's hard drive.
memorymode A Enables or disables the spare bank, mirroring, raid, and
Double Device Data Correction (DDDC) memory modes, and
also specify which mode to use.
pwrmanagement P, A Allows you to choose between maximum power, economy,
and optimized performance of the system.
pwrmonitoring P, A Congures power consumption information and thresholds.
remoteaccess A Congures remote access information.
temps P, A
Sets warning threshold values to the default or a specic
value.
NOTE: You cannot change threshold values on ESM3
and PowerEdge x8xx systems.
volts P, A
Sets warning threshold values to the default or a specic
value.
NOTE: You cannot change threshold values on ESM3
and PowerEdge x8xx systems.
storage For more information, see Using The Storage Management
Service.
Help With The Omcong Command
The following table lists the usage of omcong commands.
53