CLI Guide
• Slots Used
• ECC Type
BIOS
• Manufacturer
• BIOS Version
• Release Date
Firmware
• Name
• Version
Network Data
The following details are listed for each NIC and Team interface, if Team interface is congured in the system:
• IP Address
• Subnet Mask
• Default Gateway
• MAC Address
Storage Enclosures
The following details are listed for each storage enclosure attached to the system:
• Name
• Service Tag
Omreport System Thrmshutdown Or Omreport Servermodule Thrmshutdown
Use the omreport system thrmshutdown or omreport servermodule thrmshutdown command to view the properties congured for a
thermal shutdown action.
The three properties that display for thermal shutdown are disabled, warning, or failure. If the CLI displays the following message,
the thermal shutdown feature has been disabled:
Thermal protect shutdown severity: disabled
If the system is congured to shutdown when a temperature probe detects a warning or failure event, one of the following messages
is displayed:
Thermal protect shutdown severity: warning
Thermal protect shutdown severity: failure
Omreport System Version Or Omreport Servermodule Version
Use the omreport system version or omreport servermodule version command to list the version numbers of the BIOS, rmware,
systems management software, and operating system installed on the system. Type:
omreport system version
or
omreport servermodule version
NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed, Server
Administrator displays the USC version.
The output that is displayed in the CLI window depends on the version of the BIOS, RAID controllers, and rmware installed on the
system. The following partial command results are unique and may not resemble the results for the conguration of the system:
Version Report
---------------------
Main System Chassis
---------------------
48