CLI Guide

Output Attributes Description
Destination Number:
Destination 2
destination 2: Displays the second destination.
Example:
110.120.130.140: IPv4 address of the second destination.
Destination Number:
Destination 3
destination 3: Displays the third destination.
Example:
201:202:203:204: IPv4 address of the third destination.
Destination Number:
Destination 4
destination 4: Displays the fourth destination.
Example:
210.211.212.213: IPv4 address of the fourth destination.
Destination Number:
Destination 5
destination 5: Displays the fth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
fth destination.
Destination Number:
Destination 6
destination 6: Displays the sixth destination.
Example:
2001:0db8:85a3:0000:0000:8a2e:0370:7334: IPv6 address of the
sixth destination.
Destination Number:
Destination 7
destination 7: Displays the seventh destination.
Example:
210.211.212.213: IP address of the seventh destination.
Destination Number:
Destination 8
destination 8: Displays the eighth destination.
Example:
210.211.212.213: IP address of the eighth destination.
Destination Conguration
Settings
attribute=communitystring
communitystring: Displays the text string that acts as a password
and is used to authenticate SNMP messages sent between the
BMC and the destination management station
.
NOTE: On 12G systems with iDRAC7 specic versions, ipaddress can also be a Fully Qualied Domain Name (FQDN).
Omreport System Platformevents Or Omreport Servermodule Platformevents
Use the omreport system platformevents or omreport servermodule platformevents command to view how the system responds for
each listed platform event.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user
scripts as applicable.
Omreport System Recovery Or Omreport Servermodule Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is an action congured for a
hung operating system. You can also view the number of seconds that must elapse before an operating system is considered hung.
Omreport System Shutdown Or Omreport Servermodule Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending shutdown actions for the
system. If properties for shutdown are congured, executing this command displays these properties.
43