CLI Guide

Fans Group
----------
Settings
Enable: Informational, Warning, and Critical
Disable: None
-----------
Individual Objects
-----------
System Board Fan1 RPM Settings
Index:0
Enable: Informational, Warning, and Critical
Disable: None
System Board Fan2 RPM Settings
Index:1
Enable: Informational, Warning, and Critical
Disable: None
Omreport System snmptrapdest Or Omreport Servermodule snmptrapdest
Use the omreport system snmptrapdest or omreport servermodule snmptrapdest command to view the congured SNMP trap
destinations.
When the system is congured with the IP destinations, the following list of IP address is displayed:
Destination1 : <ip address1>
Destination2 : <ip address2>
Destination3 : <ip address3>
Omreport System Operatingsystem Or Omreport Servermodule Operatingsystem
Use the omreport system operatingsystem or omreport servermodule operatingsystem command to display information about the
operating system.
Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Use the omreport system pedestinations or omreport servermodule pedestinations command to view destinations where alerts are
sent for platform events. Depending on the number of destinations displayed, congure a separate IP address for each destination
address. Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command lists each of the valid
parameters.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user
scripts as applicable.
Destination conguration settings for the Omreport system pedestinations or Omreport servermodule
pedestinations
The actual number of destinations that you can congure on a system using omreport system pedestinations or omreport
servermodule pedestinations may dier.
The following table displays the available settings.
Table 35. Settings For The Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the rst destination.
Example:
101.102.103.104: IPv4 address of the rst destination.
42