CLI Guide
Device Description : iDRAC
Device ID : xxxx
License Index : 0
Description : iDRAC7 Enterprise Evaluation License
Status : OK
Recommended Action : N/A
License Type : Evaluation
EntitlementID : xxxx
Expiry Date : yyyy-mm-dd hh:mm:ss
Omreport System Commands Or Omreport Servermodule Commands
Use the omreport system or omreport servermodule commands to view logs, threshold values, cost of ownership information, and
information about how shutdown actions and recovery actions are conīgured.
Omreport System Or Omreport Servermodule
Use the omreport system or omreport servermodule command to see a general status of the components of the system. When you
specify a level 3 command, such as omreport system shutdown or omreport servermodule shutdown, you get detailed information
for one system component rather than the high-level status obtained with omreport system or omreport servermodule. Type:
omreport system
or
omreport servermodule
If the system has both a main system chassis or main system and at least one direct attached storage device, Server Administrator
may display a summary that resembles the following example:
Table 33. System and attached storage
SEVERITY
: COMPONENT
Ok : Main System Chassis
Critical
: Storage
Commands for viewing logs
Use the omreport system or omreport servermodule command to view the following logs: the alert log, the command log, and the
hardware or ESM log.
NOTE: If the Alert log or Command log displays invalid XML data (such as when XML data generated for the selection is
not well-formed), you must clear the log and resolve the issue. To clear the log, type: omconfig system alertlog
action=clear or omconfig system cmdlog action=clear. If you need to retain the log information for future
reference, save a copy of the log before clearing. For more information about clearing logs, see
Commands For Clearing
Logs.
To view the contents of the alert log, type:
omreport system alertlog
or
omreport servermodule alertlog
38