CLI Guide
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user
scripts as applicable.
For each slot in the system, values display for the following elds given in the following table:
Table 31. Valid Parameters Of Omreport Chassis Slots Or Omreport Mainsystem Slots
Field Description
Index Number of the slot in the system.
Slot ID Silk screen name printed on the system's motherboard next to the slot. Alphanumeric text uniquely identies each
slot in the system.
Adapter Name and/or type of the card that ts into the slot, for example, a storage array controller, SCSI adapter, iDRAC
Enterprise, or HBA.
Data Bus
Width
Width, in bits, of the information pathway between the components of a system. The range of the data bus width
is from 16 to 64 bits.
Omreport chassis temps or Omreport mainsystem temps
Use the omreport chassis temps or omreport mainsystem temps command to view properties of the system’s temperature probes.
Type:
omreport chassis temps index=n
or
omreport mainsystem temps index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and
thresholds set for any temperature probes that are present on the system. If you specify the index, Server Administrator displays the
summary for a specic temperature probe.
NOTE: On servers in the Dell PowerEdge FX2 series chassis, this command is supported only if the Chassis Management
at Server Mode is set to either Monitor or Manage and Monitor in the CMC, and Server Administrator displays the
Chassis Management at Server Mode as Enabled. For more details, see Chassis Management.
Omreport Chassis Volts Or Omreport Mainsystem Volts
Use the omreport chassis volts or omreport mainsystem volts command to view properties of the system’s voltage probes. Type:
omreport chassis volts index=n
or
omreport mainsystem volts index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and
thresholds set for any voltage probes that are present on the system. If you specify the index, Server Administrator displays a
summary for a specic voltage probe.
Omreport Licenses
Use the omreport licenses command to view the digital licenses of the hardware devices installed on the system. Type:
omreport licenses
The following is an example output from the omreport licenses command:
Table 32.
omreport licenses command
Device Index : 0
Device Status : Ok
Device : iDRAC7
37