CLI Guide

NOTE: This command is applicable only if Team interface is congured in the system. Team interface is congured using
NIC vendor tools, such as Broadcom.
NOTE: On systems running Linux operating systems with kernel versions earlier than 3.10, Team Interface speed is not
displayed.
The index parameter is optional. If you do not specify the index, Server Administrator displays details of all the Team interfaces on the
system and the values for the following elds: Index (NIC card number), Interface Name, Vendor, Description, and Redundancy
Status.
If you specify the index, Server Administrator displays the Team interface details for the specic NIC and the values for the following
elds: Team Interface, Interface, IPv4 Addresses, IPv6 Addresses , Team Interface Receive Statistics , Team Interface Transmit
Statistics , Interface Receive Statistics, and Interface Transmit Statistics.
Omreport Chassis Ports Or omreport Mainsystem Ports
Use the omreport chassis ports or omreport mainsystem ports command to view properties of the system’s parallel and serial ports.
NOTE: CMC USB ports attached with blade servers are not enumerated by OMSA.
Server Administrator displays values for the following elds: Port Type, External Name, Base I/O Address, IRQ Level, Connector
Type, and Maximum Speed. The following table provides the description of the elds:
Table 22. Fields and Description
Field Description
Port Type Detailed type of each system port, from the more general serial, parallel, and USB ports to the names of ports by
device type connected to it, for example, pointing device or keyboard.
External Name Name of the port, such as serial or parallel, USB, mouse, keyboard, and so on.
Base I/O
Address
Starting I/O address expressed in hexadecimal.
IRQ Level Hardware interrupt on a system. The hardware interrupt signals the system's CPU that an event has started or
ended in a peripheral component such as a modem or printer. When communicated over a peripheral component
interconnect card, the IRQ level is a standard way to identify the type of device that is sending the interrupt
request.
Connector
Type
Type of plug or cable and plug that connects two devices together, in this case, the type of connector that
attaches an external device to a system. There are many connector types, each designed to connect a dierent
device type to a system. Examples include DB-9 Male, AT, Access Bus, PS/2, and so on.
Maximum
Speed
Port speed. Port speed refers to the data transmission rate of an input/output channel, measured in numbers of
bits per second. Serial ports usually have a maximum speed of 115 Kbps and USB version 1.x ports have a
maximum speed of 12 Kbps.
Omreport Chassis Processors Or Omreport Mainsystem Processors
Use the omreport chassis processors or omreport mainsystem processors command to view properties of the system’s processors.
Server Administrator displays values for the following elds: Index, Status, Connector Name, Processor Brand, Processor Version,
Current Speed, State, and Core Count.
The following table provides the description of the elds.
Table 23. Fields and Description
Field Description
Index Processor number
Status Current status of the processor.
Connector Name Name or number of the device that occupies the processor slot in the system.
Processor Brand Type of processor made by a manufacturer such as Intel Itanium, Intel Pentium III, Intel Xeon, or AMD
Opteron.
30