CLI Guide
Device Name : A2
Size : 4096 MB
Type : DDR4 Synchronous Registered (Buffered)
Speed : 0.47 ns
Rank : Single
Failures : None
If you specify the speedunit MT/s, Server Administrator displays the speed in MT/s.
Table 21. Speedunit detail
Memory Device Information
Health : Ok
Status : Ok
Device Name : A2
Size : 4096 MB
Type : DDR4 Synchronous Registered (Buffered)
Speed : 2133 MT/s
Rank : Single
Failures : None
NOTE: To maintain consistency across the commands, the output format of this command and the subsequent command
levels has changed. Change the user scripts as applicable.
Omreport chassis nics or omreport mainsystem nics
Use the omreport chassis nics or omreport mainsystem nics command to view NIC and Team interface details. On XenServer, the
command displays all the installed NICs, regardless of driver installation.
NOTE: The order in which devices are detected is not guaranteed to match the physical port ordering of the device.
To view NIC properties, type:
omreport chassis nics index=n
or
omreport chassis nics index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays properties of all NICs on the system
and the values for the following elds: Index (NIC card number), Interface Name, Vendor, Description, Connection Status, and Slot.
If you specify the index, Server Administrator displays properties for a specic NIC and the values for the following elds: Physical
Interface, Interface, IPv4 Addresses, IPv6 Addresses, Physical Interface Receive Statistics, Physical Interface Transmit Statistics,
Interface Receive Statistics, and Interface Transmit Statistics.
NOTE: The Fibre Channel over Ethernet (FCoE) and iSCSI over Ethernet (iSCSI Ooad Engine) features of Converged
Network Adapter (CNA) cards are not supported on VMware ESX and VMware ESXi systems.
To view Team interface properties, type:
omreport chassis nics config=team index=n
or
omreport mainsystem nics config=team index=n
29