CLI Guide

Omreport Chassis Memory Or Omreport Mainsystem Memory
Use the omreport chassis memory or omreport mainsystem memory to view details for each memory module slot in the system. If
the system supports redundant memory, this command also displays the status, state, and type of memory redundancy implemented
on the system. Type:
omreport chassis memory index=n
or
omreport mainsystem index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays information for all memory modules
on the system as follows:
The following is an example output:
Table 18. Output
Memory Information
Health : Ok
Attributes of Memory Array(s)
Location : System Board or Motherboard
Use : System memory
Installed Capacity : 65536 MB
Maximum Capacity : 786432 MB
Slots Available : 24
Slots Used : 8
Error Correction : Multibit ECC
Total of Memory Array(s)
Total Installed Capacity : 65536 MB
Total Installed Capacity Available to the
OS
: 64386 MB
Total Maximum Capacity : 786432 MB
Details of Memory Array 1
Index : 0
Status : Ok
Status : Ok
Status : Ok
Connector Name : DIMM_A1
Type : DDR3 - Synchronous Registered (Buffered)
Size : 8192 MB
Index : 1
Status : Ok
Connector Name : DIMM_A2
Type : DDR3 - Synchronous Registered (Buffered)
27