CLI Guide
NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed, Server
Administrator displays the USC version.
Depending on the system’s conguration, you may notice the following output:
Table 15. System conguration output
Index : 0
Chassis Name : Main System Chassis
Host Name : WIN-27C02UQFV6L
iDRAC7 Version : 1.00
Chassis Model : PowerEdge R720
Chassis Lock : Present
Chassis Service Tag : 7654321
Express Service Code : 15608862073
Chassis Asset Tag : c
Omreport Chassis Intrusion
Use the omreport chassis intrusion command to nd out whether the cover of the system is open or not. Server Administrator
tracks chassis intrusion events because intrusions may indicate an attempt to steal a system component, or to perform unauthorized
maintenance on the system. Type:
omreport chassis intrusion
A message that resembles the following is displayed:
Table 16. Output
Intrusion Information
Health : Ok
Index : 0
Status : OK
Probe Name : Intrusion
State : Chassis is closed
Omreport Chassis Leds Or Omreport Mainsystem Leds
Use the omreport chassis leds or omreport mainsystem leds command to nd out whether clear hard drive fault is supported and
what severity level lights up the LED. Type:
omreport chassis leds index=n
or
omreport mainsystem leds index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of LED information for
chassis 0. If you specify the index, Server Administrator displays a summary for a specic chassis.
The following is an example output:
Table 17. Output
Main System Chassis
Flash chassis identify LED state : Off
Flash chassis identify LED timeout value : 300
26