CLI Guide

omreport (about, chassis, storage, and system). Command level 3 lists the specic objects and components to view reports. User
privilege required refers to the type of privilege you need to run the command, where U = User, P = Power User, and A =
Administrator. Use is a very general statement about the actions performed using omreport.
The following table lists the omreport commands available for about, system, and main system chassis.
Table 7. Command Level 1, Level 2, And Level 3 For omreport
Command Level 1 CommandLevel 2 Command Level 3 User Privilege Required Use
omreport modularenclosure U, P, A Displays the information
for all the modular
chassis.
about U, P, A Displays the version
number and properties
for Server Administrator.
details=true U, P, A Displays the information
for all the Server
Administrator programs
installed.
chassis or mainsystem U, P, A Displays the general
status of all the main
components.
acswitch U, P, A Displays the failover
settings where
redundant AC power
lines are supported in a
system.
batteries U, P, A Displays the properties
set for batteries.
bios U, P, A Displays the BIOS
information such as
manufacturer, version,
and release date.
biossetup A Displays the BIOS setup
properties congured
during system boot.
fans U, P, A Displays the status and
thresholds for system
fans.
rmware U, P, A Displays the name and
version of the rmware.
frontpanel U, P, A Displays whether the
front panel button
settings, such as the
Power button and/or
Nonmasking Interrupt
(NMI) button (if present
on the system), are
enabled or disabled. It
also displays the front
panel encryption access
16