CLI Guide

Omcong autocongure RAID-0
Table 187. Omcong autocongure RAID-0
Description Automatically congures RAID–0 with all disks that are in ready state.
Syntax omconfig storage controller action=autoconfigureRAID0 controller=id , where id is the
controller ID as reported by the omreport storage controller command.
Example to Automatically congure RAID–0 with other disks.
Example
omconfig storage controller action=autoconfigureRAID0 controller=1
Omcong Set Patrol Read Mode
Table 188. Omcong Set Patrol Read Mode
Description Sets the patrol read mode for the controller.
Syntax
omconfig storage controller action= setpatrolreadmode controller=id mode=
manual|auto|disable, where id is the controller ID as reported by the omreport storage controller command.
Example to Sets the patrol read on controller 1 to manual mode
Example
omconfig storage controller action= setpatrolreadmode controller=1 mode=manual
Omcong Start Patrol Read
Table 189. Omcong Start Patrol Read
Description Starts the patrol read task on the controller.
Syntax omconfig storage controller action=startpatrolread controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Start the patrol read task on controller 1.
Example
omconfig storage controller action=startpatrolread controller=1
NOTE: To start patrol read, the current patrol read mode is set to Manual.
Omcong Stop Patrol Read
Table 190. Omcong Stop Patrol Read
Description Stops the patrol read task on the controller.
Syntax omconfig storage controller action=stoppatrolread controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Stop the patrol read task on controller 1.
Example
omconfig storage controller action=stoppatrolread controller=1
NOTE: To stop patrol read, the current patrol read mode is set to Manual.
157