CLI Guide

Required Command Levels (1,
2, 3)
Optional name=value pairs
action=enableuidcache controller=id vdisk=id devicename=<string> cachepolicy=<wb | wt>
action=disableuidcache controller=id vdisk=id devicename=<string>
action=reactivate controller=id vdisk=id devicename=<string>
Omcong Check Consistency
Table 132. omcong Check Consistency
Description
Initiates a check consistency on a virtual disk. The check consistency task veries the virtual disk’s
redundant data.
Syntax omconfig storage vdisk action=checkconsistency controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the controller IDs
and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks
attached to the controller.
Example to Run a check consistency on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=checkconsistency controller=1 vdisk=4
Omcong Pause Check Consistency
Table 133. omcong Pause Check Consistency
Description
Pauses a check consistency while in progress. For more information, see the Dell EMC
OpenManage Online Help.
Syntax
omconfig storage vdisk action=pausecheckconsistency controller=id
vdisk=id , where id is the controller ID and virtual disk ID as reported by the omreport
command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the virtual disks attached to the controller.
Example to Pause a check consistency on virtual disk 4 on controller 1
Example
omconfig storage vdisk action=pausecheckconsistency controller=1
vdisk=4
Omcong cancel check consistency
Table 134. omcong cancel check consistency
Description
Cancels a check consistency while in progress.
Syntax
omconfig storage vdisk action=cancelcheckconsistency
controller=id vdisk=id, where id is the controller ID and virtual disk ID as
reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks attached to the controller.
Example to Cancel a check consistency on virtual disk 4 on controller 1.
137